İNTEGRAL DUAL series thickness gauge can non-destructively measure the thickness of non-conductive cladding on metal surfaces, as well as non-ferromagnetic metal cladding on
ferromagnetic metal (such as iron, nickel and cobalt, etc.) surfaces. Specific uses include measuring the thickness of painted or galvanized layers on iron and stainless steel surfaces, measuring the thickness of painted or plastic films on aluminum and copper surfaces, etc. İNTEGRAL DUAL has a built-in magnetic induction and eddy current effect probe, with a measurement range of 0~2000μm and ±(3%+1μm) measurement accuracy, and its resolution
can reach up to 0.1μm. The İNTEGRAL DUAL has only one button and is very easy to operate. When measuring, the user only needs to quickly attach the probe end to the surface of the object to be measured, and as
the probe shrinks inside the instrument, the instrument can automatically distinguish the properties of the substrate and measure the thickness of the coating. The İNTEGRAL DUAL has two displays, with the large LCD screen on the front of the instrument and the smaller OLED screen on the top of the instrument. The dual display makes it easy for users to view the measurement results from different angles.
FEATURES:
Ruby probe
Resolution up to 0.1μm
Accuracy ±(3%+1μm)
Measuring range 0~2000μm
Iron galvanized base material
identification
Statistic analysis of data
Users calibration supported
Maximum measurement speed 2
readings/sec
Auto-rotate screen
Display with backlight
Power off automatically
Battery protection
APPLICATION:
Car paint thickness detection
Shipbuilding
Metal anti-rust treatment
Film thickness detection
Hardware parts processing
Coating Thickness Gauge
NOTICES:
• Avoid sun exposure.
• Avoid direct contact with corrosive chemicals.
• Be careful of falling.
WARNING:
• Disassemble without permission prohibited!
• Strictly prevent strong electricity and static shock!
Probe type Internal probe
Measuring principle Fe:Magnetic induction;NFe:Eddy currents
Measuring range 0~2000μm
Accuracy ±(3%+1μm)
Resolution 0.1μm(0~100μm);1μm(>100μm)
Unit μm, mm, mil
Iron galvanized base
material identification 3~500μm
Calibration Zero calibration
Statistic Number of readings, Max, Min,Mean
Probe trigger force 0.3~0.8N
Minimum curvature radius Convex 5mm;Concave 25mm
Minimum measuring area Diameter 15mm
Minimum thickness of
substrate Fe:0.30mm;NFe:0.05mm
Maximum measuring rate 2 readings/s
Display Dot matrix display
Operation environment Temperature:-10~50℃;Humidity:20~90%RH (Non-condensing)
Storage environment Temperature:-20~60℃;Humidity:20~90%RH (Non-condensing)
Power supply 2 pcs 1.5V AAA alkaline batteries
2 pcs 1.2V AAA rechargeable batteries
Protection class IP40
Size 102*53.6*25mm
Case material ABS
Weight About 80g (No battery)